Carl's Grill Talk

Sonoma CGR30 (Made by Sure Heat)

Pictures below are from a customer that cleaned the burners and the electrode shield. 

Order parts from the link below.

http://www.clagrills.com/allgrillparts/sonoma/sonoma-model-cgr30.htm

Spec plate showing the model and serial number

as well as the factory information.

He cleaned the grill out well and installed the new burner

assembly. The electrode was left out here and I can't make

out if he added them later. It's better to attach the 

electrodes on the burner before installing the burner

assembly.

The heat plates are installed here.

The extra heat plates between the heat shield and the 

electrode shield installed.

A better picture showing the heat plates and the ones in 

between with the electrode shield under.

It looks like he didn't install the electrodes so I added

the next 2 pictures showing the electrodes installed on

the burner assembly. It is not uncommon for people

to manually light the grill using a long stemmed lighter.

It might have some holes for that or you might have to

practice lighting it through the grids, so Be Careful!

Burner assembly from the bottom showing the electrodes

installed. The shield next to it is probably there to protect

the wires from the burner heat and grease drippings.