Carl's Grill Talk

Kenmore 720-0341

Img #1 - This Kenmore is made by http://www.nexgrill.net . You can find the basic parts at: http://www.clagrills.com/allgrillparts/nexgrill/nexgrill-model-720-0341.htm .

Img #2 - The burners are exposed after removing the grids and flame tamers.

Img #3 - You'll need to remove the burners by getting the bolt holding the burner to the bracket in the back. You might have to drill it or grind it out.

Img #4 - Burner bracket - can use CLA-MS0070 which can be seen at:

http://www.clagrills.com/allgrillparts/all-repair-parts.htm (Coming Soon!)

Imgs #5 & 6 - Remove the igniter cap by unscrewing it. The igniter is held down by a plastic nut.

Img #7 - The ignitor is a 5 outlet part, uses CLA number TS-IG5011 seen at: http://www.clagrills.com/allgrillparts/all-igniters.htm .

Img #8 – The battery goes in, positive first!

Img #9 - LP hose and regulator- can use #10114-K47, as seen at: http://www.clagrills.com/allgrillparts/all-hoses-regulators.htm .

Img #10 - Gas connector for hose is standard 3/8 male flared fitting which connects to the common LP hose found in most hardware/home depots.

Img #12 - Grill Lid Up