Carl's Grill Talk

3.  If you haven't thaken the time to remove, check and totally clean the burners, you should do so now.  Remove the grids and flame tamers to expose the burners.

 Removing each burner, turn the valve to that burner on high(with the tank valve open) and put a finger in the hole where the burner goes into to see if gas is coming through.

You will likely have to remove one or more screws or pins holding part of the burner down. Usually the burner comes out by lifting the rear and pulling up and to the back of the grill.

Check each burner and clean away all rust, including loose rust inside the burner.  You should be able to blow out it out with compressed air or shake it out.